主營產品:CG賽車開獎結果大地彩票官方開獎網試驗機-CG賽車開獎結果耐大地彩票官方開獎網試驗機-滑動大地彩票官方開獎網試驗機
海綿泡沫檢測儀器

聯系人︰馬河畔
手機︰13581986832

英文版海綿泡沫切割機

专业安全的快乐时时彩彩票平台

型    號︰ GCPQ-100
報    價︰ 1000
分享到︰

本機主要用于泡沫材料的切割,其可將硬質泡沫、軟質泡沫、CG賽車開獎結果切割成方形、長方形、條形等,具有切割效率高,切割尺寸準確,精確度高等優點。

GCPQ-100英文版海綿泡沫切割機的詳細資料︰

 

GCPQ-100

海綿泡沫切割機(試驗室)

Sponge foam cutting machine (laboratory special-purpose)

一、主要適用範圍及功能

One, the main scope and function

本機主要用于泡沫材料的切割,其可將硬質泡沫、軟質泡沫、CG賽車開獎結果切割成方形、長方形、條形等,具有切割效率高,切割尺寸準確,精確度高等優點

This machine is mainly used for cutting the foam material, it can be hard foam, soft foam, plastic cut into square, rectangular, strip, with high cutting efficiency, cutting size is accurate, the advantage of high precision

二、主要技術要求︰

Two, the main technical requirements:

1、切割顯示分辨率︰0.01mm

The 1, cutting the display resolution: 0.01mm

2、切割尺寸精度︰±1mm

2, the cutting precision: ± 1mm

3、工作台尺寸︰1000×700mm(可根據用戶需要而定)

3, table size: 1000 x 700mm (according to user required)

4、可移動工作台有效行程為 500mm

4, can be effective stroke moving table 500mm

5、zui小切割尺寸︰25×25×10mm

5, the minimum cut size: 25 x 25 x 10mm

6、zui大試樣厚度︰250mm

6, the maximum thickness: 250mm

7、電源電壓:220V

7, the power supply voltage: 220V

8、功率︰ 2.2KW

8, power: 2.2KW

三、結構特點︰

Three, structural characteristics:

1、該機配有可移動切料調正尺寸裝置。為保證切料尺寸精度,配有數字顯示尺。

1, the machine is provided with a movable cutting alignment size device. In order to ensure cutting precision, fitted with digital display ruler.

2、可移動工作台,采用負壓吸附方式,固定被切割泡沫。

2, the movable worktable, the negative pressure adsorption, fixed by cutting foam.

3、停止運轉時,配有手動、自動裝置。

3, stop functioning, with manual, automatic device.

4、紅色剎車按鈕用于手動剎車。當啟動按鈕按下時此按鈕無效

4, the red brake button for manual brake. When the start button is pressed the button is not available

5、當剎車電磁鐵吸合時,按下啟動按鈕,剎車電磁鐵立即釋放。

5, when the braking electromagnet, press the start button, immediay release the brake electromagnet.

四、設備主要配置

The main configuration, equipment four

1、試驗主機一台

1, test a host

2、控制系統一套

2, a set of control system

3、吸附裝置一套

3, an adsorption device

4、數顯標尺一個

4, a digital scale

5、驅動電機一個

5, a drive motor

6、切割刀一片(增配一片)

6, the cutting blades (with a)

7、磨刀砂輪片一片

7, grinding wheel piece

8、吸塵裝置一套

8, a dust suction device